Education  
   
   
   
  Entertainment  
   
   
   
   
  Advertisements  
   
   
   
   Annauniversity.Info
   e d u c a t i o n    ' n '    e n t e r t a i n m e n t
 
Model Question Papers Home page
 
ELECTRONIC CIRCUITS

ANNA UNIVERSITY :: CHENNAI - 600 025

MODEL QUESTION PAPER

B.E. DEGREE PROGRAMMES

EC 250 - ELECTRONIC CIRCUITS

Time: 3hrsMax Marks: 100
Answer all Questions
PART - A (10 x 2 = 20 Marks)
1.Explain the differences between intrinsic and extrinsic semiconductors.
2.When a reverse bias is applied to a germanium diode the revere saturation current at room temperature is 0.3 A. Determine the current flowing in the diode when 0.15 V forward bias is applied at room temperature.
3.Draw a common collector amplifier and its equivalent circuit.
4.Prove that negative feedback in amplifiers improves the stability.
5.Draw a BIFET circuit.
6.What are the ideal characteristics of op–amp?
7.What are the Barkhausen criterions?
8.Define line regulation and load regulation of a voltage regulator.
9.Draw an active integrator and derive its output expression.
10.Explain the application of analog multiplexer as phase detector.
PART - B (5 x 16 = 80 Marks)
11.

(i)    Why there is a need for biasing an amplifier? (4)

(ii)    Draw the ac equivalent circuit of the circuit shown. Find the Avs , Rin and R0. (12)

hFe = 100        hFe = 1.1 K

12.a)

Compare CE, CB and CC transistor configurations.

(i)    Interms of input impedance, output impedance, current gain and voltage gain. (10)

(ii)    Draw the output characteristics of CE configuration and mark its regions of operation. (6)

(OR)
12.b)

(i)    Explain the characteristics of JFET with its structural diagram. (10)

(ii)    A JFET has drain current of 4 mA. Find Vgs if IDss = 8 mA and Vp = 6 V. (6)

13.a)

(i)    Define slew rate of Op–Ap. (3)

(ii)    Determine the cutoff frequency of OP–amp whose unity gain bandwidth is 1 MHz and open loop gain is 2 x 105. (3)

(iii)    Derive the expression for the output of non–inverting amplifier and inverting amplifier. (10)

(OR)
13.b)

(i)    Draw the architecture block diagram of Op–amp. (4)

(ii)    Compare the different types of feedback with respect to gain with feedback, Rin and R0 . Give an amplifier circuit as an example for each type of feedback. (12)

14.a)

With internal block diagram explain the working of NE555 Timer as monostable multivibrator. Derive its ontime. (16)

(OR)
14.b)

(i)    With a neat diagram explain Line and Load regulation of series voltage regulator. (10)

(ii)    Design a Wein bridge oscillator to generate a Sinusoidal Oscillator at 5 KHz with peak to peak output voltage of 30 V. Draw the designed circuit. (6)

15.a)

(i)    Design a Butterworth LPF with roll off rate of –400db/decade with a cut off frequency of 3 KHz. Draw the designed circuit. (6)

(ii)    With characteristics explain Butterworth and Chebyshev filter. (10)

(OR)
15.b)

Draw an Electronic analog circuit to solve the following :

(i)     (10)

(ii)     y = 10 sin 3t (6)

 
Advertisement Links by Google
 
Google
Home | About | Contact | College Syllabus | Question Papers | Aptitude Test | Games | Movies | Mobiles | E-Mails | Site Map